If you wish to have a splash-tastic summer right in your own backyard, then you got to set up a swimming pool. However, if you wish to provide your family an un-interrupted swimming experience, you would require installing cartridge pool filter that would keep your pool clean and sanitary.
To maintain a clean and hygienic pool, it is suggested that you swap your pool filter cartridge just about every two weeks with a clean cartridge. This type of filter traps minutest of contaminants quite effectively as the impurities gets trapped among the pleats of the cartridges ensuring crystal clear pool water. However, when the pool water gets contaminated with contaminants like sun-tanning or oil-based products introduced by bathers, then your pool filter would require extra cleaning efforts from your side.
As a matter of fact, more and more debris get collected in your cartridge filter with time. However, when debris collected reaches its saturation levels, a gradual fall in the level of filtered pool water is witnessed besides high range of back-pressure on the pressure gauge.
One thing that you need to keep in mind is that, you should not allow too much of debris to get accumulated in your cartridge filter and clean it up on a regular basis. In order to get rid of the loose dirt, rinse your filter with a garden hose can be used. A soft bristle brush can also be used to remove dirt lodged among the pleats of the cartridge.
Even after thorough rinsing with water, certain deposits still remain deeply embedded within the filter pleats. These contaminants include oils, grease and grime which hinder the filtering ability of the cartridge. Such oily filter cartridges could not be cleaned up merely through rinsing with water but should be dipped overnight in an alkaline solution so that the oily scum may dissolve.
Once the oily scum is completely removed then, rinse the filter thoroughly with water and dry it completely before reinstalling. Get in touch with us at Pool Filters to view an entire range of cartridge pool filter.